InfoSight has created a special version of its KettleTag®Plus tag specifically to identify metal grates through galvanizing and installation. Now grate fabricators can have the efficiency and safety of barcoding and product tagging.
GrateTagTM is designed to be welded onto the grate prior to galvanizing. The special attachment process insures the surface behind the tag is exposed to the zinc bath. Tags stay attached after installation for permanent identification and traceability.
- Error-proof tracking for grates
- One tag for the entire process
- Call for samples and test GrateTagTM in your process.
Download the GrateTagTM Brochure here.
Technical specifications are subject to change without notice
GrateTag and We Barcode Difficult Stuff are trademarks of InfoSight
KettleTag is a registered trademark of InfoSight
GrateTag™ Specifications
| Industry | Metal grates and treads |
| Typical Customer | Grate fabricators and galvanizers |
| Purpose | Tracking work pieces through galvanizing, delivery and installation |
| Resistance | Heat: 1000°F (538C) after removal of protective laminate |
| Chemical: Tags legible after most caustic/acid rinses (10 minutes each and molten zinc bath) | |
| Abrasion: Moderate | |
| Ultraviolet: Highly resistant to sunlight and fading | |
| Sizes | Width: 3.0in (76mm) Lengths: to customer specification, not less than 1.0 in (25mm) Typical Lengths: 1.0 in (25mm) |
| Composition | Metal with high contrast laser-markable coatings and specialty laminates |
| Available Forms | Pre-printed by InfoSight or print on-site with one of InfoSight's durable, laser metal tag printers |
| Available Colors | Standard white, colors by special order |