Software
Version 3
The LabeLase® Producer Tag Production Software is a Windows program designed to control InfoSight Corporation's LabeLase® Metal Tag Printer models LL1000, LL1000V, LL1000P, LL3000, LL4000, LL28xx and JM410. Version 3 allows you to control up to four printers with one computer.
Note that this page describes the older V2.x version of LabeLase® Producer.
The LabeLase® Producer Tag Production Software is a Windows program designed to control InfoSight Corporation's LabeLase® Metal Tag Printer models LL1000, LL1000V, LL1000P, LL3000, LL28xx and JM410. Version 2 of this software introduces many new features and simplifies the tag design and production process.
Note that this page describes the older V1.x version of LabeLase® Producer.
The LabeLase® Producer Tag Production Software version 1.x is a Windows program designed to control InfoSight Corporation's LabeLase® Metal Tag Printer models LL1000, LL1000P, LL3000, LL28xx and JM410. The program is available for download and an online manual is also available.
The following utilities are available for the InfoSight ARM based CPU card (ITM32137.) This card is used to control the latest models of InfoSight's I-Dent®, InfoDent® and InfoTag® printers.
Programming utility DfuSe - This Windows utility allows you to upgrade the firmware on the CPU card via a USB interface. Requires a micro USB cable and firmware file for your application. Instructions for using the DfuSe utility are also available.
Network Configuration utility - This Windows utility allows you to configure the IP address of the CPU card. Connect the card to your Ethernet network and run this utility to find it and set its IP address.
A free, open source application demonstrating a simple method for communicating with an InfoSight marking system using TCP/IP sockets and Extended Protocol.
A diagnostic utility program is available for download which simulates the Extended Protocol master and slave. This program for Windows makes it easy to test both ends of the communications link and help to verify your communications driver.
The Logo Designer software provides a WYSIWYG interface to create custom logo images for InfoSight’s I-Dent® and InfoDent® line of industrial markers.
Tag Layout Utility for the KE28xx series InfoTag® metal tag printers. This WYSIWYG editor allows you to graphically design a tag and then send it to the tag printer.
The XLTags Tag Printing Utility is a software program designed to send data in a Microsoft Excel spreadsheet to a KE28xx model InfoTag® metal tag printer. This Windows software utility is available for download.
Note that this utility is for the older KE28xx model printers and is not required for the newer LabeLase® Producer™ based printers.
Page 1 of 2