The OptiCode® Smart-Camera Barcode Reader from InfoSight is a compact industrial reading system designed for high-speed reading and/or long distance reading of industry standard and custom barcodes.
The reader uses “Smart-Camera” architecture that contains specialized hardware and software for the optimal reading of barcodes.
Benefits
- Barcode Reading from a distance up to 50ft (15m)
- Read from Carriers or Cranes
- Track Material from Casting to Stock to Rolling
- Configure as Single Camera or Multi-Camera Installation
- Fixed mount or Hand-held versions available
Major Components of standard OptiCode® Smart Camera System are:
- High speed barcode reading hardware in FPGA (field programmable gate array)
- Microprocessor running standard or application specific software
- RS-170 video input (for cascading multiple readers for connection to a single monitor)
- One RS-232/RS485 "Host" communications port (for data output, triggering, and configuration)
- One RS-485 "Local" communications port (for interconnecting multiple readers to work as one, and for I/O expansion)
- 5V I/O (2 inputs / 3 outputs standard) for triggering, read status, and misc.
- EEPROM for storage of reader configuration
- C-Mount Lens Mount (also available for CS-Mount)
Supported Symbologies (linear)
Code128
Code 39
Interleaved 2 of 5
EAN-13 / UPC-A
Custom Binary Codes
(InfoSight)
Specifications
| Power | 5VDC ± 0.5V, 0.5A |
| Operating Temperature | 0° C to +60° C |
| Video In/Out | RS-170 (monochrome) |
| Host (UART 1) Communications | RS-232 / RS-485 (switch selectable) 9600 Baud, 8 Data Bits, 1 Stop Bit, No Parity |
| I/O | Hardwire I/O connections are made via 6-pin connector on the back of the reader |
|
5VDC, active low, internal 10K ohm pull-up resistor Minimum input pulse width: 20ms Standard Inputs: "READ BARCODE", "EDGE TRIGGER" |
|
5VDC, active high Minimum output pulse width: 1/2 second (500ms) Standard Outputs: "GOOD READ", "NO READ", 1 undefined |
| Image Sensor (Camera based) | Resolution: 1280H x 1024V (pixels) |
| Lens Mount | C-Mount (CS-Mount available) |
| Barcode Scan Modes: DIP-switch selectable |
Mode 0 Horizontal, 30 fps (frames per second) Mode 1 90° omni-directional, 15 fps Mode 2 20° omni-directional, 10 fps Mode 3 10° omni-directional, 7.5 fps Mode 4 5° omni-directional, 3.8 fps Mode 5 2.5° omni-directional, 2.1 fps Mode 6 20° Near horizontal omni-directional, 15 fps Mode 7 Reserved for future use |
Optional
| RS-170 Video Monitor | Required for lens adjustment |
| Lighting | Per application, please consult with InfoSight Corporation (lighting may be supplied by customer) |
| Environmental Enclosure | Per application, please consult with InfoSight Corporation |
| Necessary C-Mount Lens | Per application, please consult with InfoSight Corporation (lens may be supplied by customer) |
Specifications are subject to change without notice
OptiCode is a registered trademark of InfoSight Corporation